Comments on: Make this Starburst Trellis

By: Karin

Karin — Thu, 25 Jun 2020 11:48:57 +0000

This is great! I’m looking to work on this project this weekend. What type & size nails did you use? Thanks!

By: Jill

Jill — Wed, 10 Jun 2020 02:29:35 +0000

During quarentine my 17 year old decided to take on a few projects. He made a shiplap wall in my bathroom and today he made this project on a small scale. I love it! Thank you

By: Sharon Kinsman

Sharon Kinsman — Tue, 26 May 2020 21:36:50 +0000

Hi there, I must be missing this but what is the finished size. Thanks this is exCtly what I’m looking for

By: Julissa

Julissa — Sat, 23 May 2020 16:24:40 +0000

Hi! Thank you so much for the instructions. I am making this right now and noticed that you mentioned 20 – 19 5/8 slats. I cut those and as I am assembling it, I have 4 extra slats and 4 extra sticks. I’m I supposed to have extra pieces?

By: Angele

Angele — Sun, 10 May 2020 02:15:52 +0000

Love this!!! Would you be willing to share the stain colour for your fence?!

By: Chelsea

Chelsea — Fri, 17 Apr 2020 17:32:27 +0000

In reply to Jenn McGrady. Jenn, do you have a photo of your improvised project complete? Could I see what yours ended up like? (karmdzine42@gmail.com)

By: Jenn McGrady

Jenn McGrady — Sun, 19 May 2019 20:13:38 +0000

Judging by your instructions and what I just followed of them, also based on your pictures, it appears you are no using 1×2 lumber. That appears to be 2×2. Also, 1×2 lumber is actually 2 1/2” wide, making the measurement for the inner rails incorrect. They would need to be 7’7” and not 7’9” for the inner rails, compensating for the 2 1/2” of the width of the 1×2’s. Unfortunately now that I am more than halfway through this project, I am forced to improvise, as 1×2’s also do not allow for a good penetration for the nail gun. Which by the way, I have the exact same one you used. The project you designed is beautiful but the instructions are inaccurate.

By: beks

beks — Fri, 11 May 2018 18:41:19 +0000

Can you share the cost and how long this took to build? Thanks!

By: Jessica

Jessica — Mon, 07 May 2018 02:32:10 +0000

I first stumbled upon the planter/ice box you designed, but also was loving the wall art above it! I was honestly googling “outdoor chevron wall art” until realizing you probably made that too. I’m obsessed and I think we are going to attempt both for our new deck. Thanks for posting such amazing ideas!

By: Angela

Angela — Mon, 30 Apr 2018 14:04:42 +0000

Wow! What an amazing design. You have an incredible eye. Thank you so much for sharing.

By: Go Keyboard 2018 Pro Apk

Go Keyboard 2018 Pro Apk — Wed, 25 Apr 2018 14:11:41 +0000

I like for the information, Thank you so much for article…!

By: cat

cat — Sun, 08 Apr 2018 02:49:56 +0000

I really, very, truly, like this. Thanks for the instructions and cool vid, too.

By: Scoops

Scoops — Tue, 03 Apr 2018 19:05:42 +0000

In reply to Mikael. Hey! Thanks so much! I found the lumber at the Home Depot in the section where they display the fancier specialty lumber. Wood with descriptors such as "select pine" - you know, the stuff that comes with barcodes on it ;) The lumber used for this project was not select pine, but it was found in that same aisle, and is described as "kiln dried whitewood board" - the dims are the typical 1.5" x 3/4" but with crisp edges. Here's the link. It's not pressure treated, but I wasn't intending to grow perennials on it, so longevity wasn't as important. They do sell this pressure treateded "cedar-tone" board though, and it looks to me to be just what you're looking for.

By: Mikael

Mikael — Tue, 03 Apr 2018 17:56:26 +0000

Wow, that looks incredible! What kind of wood did you use for this? I don’t see rounded edges on it, so are you using S4 lumber? I’ve always had a HORRIBLE time trying to find pressure treated wood to make trellis with, it seems the smallest dimensions I can find are 2x4s at the big box stores.